GSO ISO 8669-2:2016
ISO 8669-2:1996
مواصفة قياسية خليجية
أكياس البول -- الجزء 2: المتطلبات وطرق الاختبار
Gulf Standard
Urine collection bags -- Part 2: Requirements and test methods
ICS:
11.180.20

تقديم خليجي

هيئة التقييس لدول مجلس التعاون لدول الخليج العربية هيئة إقليمية تضم في عضويتها أجهزة التقييس الوطنية في الدول الأعضاء ، ومن مهام الهيئة إعداد المواصفات القياسية واللوائح الفنية الخليجية بواسطة لجان فنية متخصصة.
قرر المجلس الفني لهيئة التقييس لدول مجلس التعاون لدول الخليج العربية في الاجتماع الـ (40) بتاريخ 1439/10/03هـ ،الموافق 2016/12/22م اعتماد المواصفة القياسية الخليجية رقم GSO ISO 8669-2:2016 وعنوانها "أكياس البول -- الجزء 2: المتطلبات وطرق الاختبار" باللغة الانجليزية التي تم دراستها وتبنيها بالمصادقة عبر المسار السريع عن المنظمة الدولية للتقييس رقم ISO 8669-2:1996 .

Gulf Foreword

GCC Standardization Organization (GSO) is a regional organization which consists of the national standardization bodies of GCC member states. One of GSO main functions is to issue gulf standards and technical regulations through specialized technical committees.
GSO Technical Council in its meeting number (40) held on 03/10/1439H, which corresponds to 22/12/2016, has approved Gulf Standard GSO ISO 8669-2:2016 titled "Urine collection bags -- Part 2: Requirements and test methods" in English language which was studied and adopted by endorsement from International Organization for Standardization Standard ISO 8669-2:1996 through fast track .

INTERNATIONAL

STANDARD

ISO
8669-2
Second edition
1996-12



Urine collection bags —
Part 2:
Requirements and test methods
Poches de recueil d'urine —
Partie 2: Prescriptions et méthodes d'essai



>>
<<
Contents Page
ISO 8669-2:1996 (E)
Foreword
Introduction
Scope
Normative reference
Definitions
Requirements
Rated volume
Freedom from leakage without load
Freedom from leakage under load
Freedom from leakage under impact
Nonreturn valve
Strength of the attachment system
Strength of attachment of the inlet tubing
Pressure/time required to initiate flow into the bag and filling rate
Dimensions
General test conditions
Temperature
Test samples
Test methods
Test volume
Principle
Reagent
Apparatus
Procedure
Test report
Freedom from leakage without load
Principle
Reagents
Apparatus
Procedure
Test report
Freedom from leakage under load
Principle
Reagent
Apparatus
Procedure
Test report
Freedom from leakage under impact
Principle
Reagent
Apparatus
Procedure
Test report
Nonreturn valve
Principle
Reagent
Apparatus
Procedure
Test report
Strength of the attachment system of bags provided with cutouts
Principle
Apparatus
Procedure
Test report
Strength of the attachment system of bags provided with a button and buttonhole system
Principle
Apparatus
Procedure
Test report
Strength of integral suspensory systems
Principle
Apparatus
Procedure
Test report
Strength of attachment of the inlet tubing
Principle
Apparatus
Procedure
Test report
Pressure/time required to initiate flow into the bag and filling rate
Principle
Reagent
Apparatus
Procedure
Test report
Test reports
Dimensions of urine collection bags

Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 8669-2 was prepared by Technical Committee ISO/TC173, Technical systems and aids for disabled or handicapped persons, Subcommittee SC 3, Aids for ostomy and incontinence.
This second edition cancels and replaces the first editions of ISO 8669-2:1988, ISO 8669-3:1990 and ISO 8669-4:1990, which have been technically revised.
ISO 8669 consists of the following parts, under the general title Urine collection bags:
Part 1: Vocabulary
Part 2: Requirements and test methods
Annex A forms an integral part of this part of ISO 8669.

Introduction

Users of this part of ISO 8669 are advised to consider the desirability of third-party certification of product conformity with this part of ISO 8669, based on testing and continuing surveillance, which may be coupled with assessment of a supplier's quality system against the appropriate standards in the ISO 9000 series.
INTERNATIONAL STANDARD ISO 8669-2:1996 (E)
Urine collection bags —
Part 2:
Requirements and test methods

1 Scope

This part of ISO 8669 specifies performance requirements and test methods for open-ended and closed-ended urine collection bags of the following types:
a)
urine collection bags intended to be worn on the body (body-worn bags);
b)
urine collection bags intended to be used with a hanger or a floor stand (non-body-worn bags).
It does not apply to urostomy bags, urimeters and urine bags intended specifically for paediatric use.

2 Normative reference

The following standard contains provisions which, through reference in this text, constitute provisions of this part of ISO 8669. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part of ISO 8669 are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.
ISO 8669-1:1988, Urine collection bags — Part 1: Vocabulary.



ICS 11.180.20
Price based on 15 pages