ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of ISO document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

ISO draws attention to the possibility that the implementation of this document may involve the use of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s) which may be required to implement this document. However, implementers are cautioned that this may not represent the latest information, which may be obtained from the patent database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.

Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of steel substrates before application of paints and related products, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 139, Paints and varnishes, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

This third edition cancels and replaces the second edition (ISO 8501-3:2006), which has been technically revised. The main changes compared to the previous edition are as follows:

A list of all parts in the ISO 8501 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A complete listing of these bodies can be found at www.iso.org/members.html.

The performance of protective coatings of paint and related products applied to steel is significantly affected by the state of the steel surface immediately prior to painting. This document provides requirements for steel building organizations to avoid unnecessary production costs for steel structures that will be painted.

The principal factors that are known to influence the performance of protective coatings of paints and related products applied to steel are:

ISO 8501, ISO 8502 and ISO 8503 series have been prepared to provide methods of assessing these factors, while ISO 8504 series provide methods that are available for cleaning steel substrates, indicating the capabilities of each in attaining specified levels of cleanliness.

The ISO 8501, ISO 8502, ISO 8503, and ISO 8504 series do not cover the protective coating system to be applied to the steel surface. Nor do they cover the surface quality requirements for specific situations, even though surface quality can have a direct influence on the choice of protective coating to be applied and its performance. This subject matter is covered in other documents such as national standards and codes of practice.

Imperfections at welds, edges and other areas of steel substrates are generally starting points for corrosion. Such areas are also difficult to protect by application of paints and related products. To assist in achieving efficient corrosion protection, this document describes certain imperfections and defines preparation grades for such areas.

Steel imperfections can be generated in the manufacturing process or during handling, shipping, building and erection of a steel structure and can affect the durability of a protective coating system if they are not remedied.

The required preparation grade (P1 to P3) for a specific steel structure should be based on the required longevity of the coating system and the corrosivity of the environment that the coated steel structure will be exposed to.

The specified surface preparation grade should be compatible with other steel structures requirements, e.g. those specified in the ISO 8501 series, ISO 5817, the EN 10025 series and the EN 10163 series.